{
  "torque_Nm": 72.44293961424202,
  "force_N_assumed": 500.0,
  "E_MPa_assumed": 200000.0,
  "RA_N": -352.94117647058823,
  "RB_N": 852.9411764705883,
  "segments_mm": [
    [
      0,
      40,
      25
    ],
    [
      40,
      80,
      30
    ],
    [
      80,
      210,
      35
    ],
    [
      210,
      250,
      30
    ],
    [
      250,
      300,
      35
    ],
    [
      300,
      340,
      30
    ],
    [
      340,
      360,
      25
    ]
  ],
  "comparison": [
    {
      "d_mm": 30,
      "I_mm4": 39760.782021995816,
      "bending_MPa": 22.63536968418067,
      "torsion_MPa": 13.66477265980954,
      "von_mises_MPa": 32.74962589515123
    },
    {
      "d_mm": 32,
      "I_mm4": 51471.85403641517,
      "bending_MPa": 18.650969893581486,
      "torsion_MPa": 11.259425714564745,
      "von_mises_MPa": 26.98486020413462
    },
    {
      "d_mm": 35,
      "I_mm4": 73661.75743426848,
      "bending_MPa": 14.254343591204155,
      "torsion_MPa": 8.605221266818836,
      "von_mises_MPa": 20.623671117646257
    }
  ],
  "deflection": {
    "30": {
      "seal_deflection_mm": 0.06139844018789533,
      "impeller_deflection_mm": 0.08754596433550171,
      "support_residual_mm": 0.0
    },
    "35": {
      "seal_deflection_mm": 0.044077434642653915,
      "impeller_deflection_mm": 0.06292412607551776,
      "support_residual_mm": 0.0
    },
    "virtual_work_mm": 0.04407743488398743
  },
  "note": "All geometry except 35 mm loaded diameter, and all load/support/material assumptions, are illustrative. Nominal section calculations exclude fillets, keyways, fatigue, dynamics and bearing flexibility."
}